Skip to main content

Star Special Gases

Nitrogen purging is one of the most common procedures in industrial maintenance, used to displace flammable vapors or oxygen from pipelines, tanks and process vessels before maintenance, inspection or hot work begins. It is favoured because nitrogen is inert, widely available and economical compared to alternatives.

Typical uses include drying a line to a target dew point before commissioning, inerting a vessel ahead of welding or cutting, and pressure testing new or repaired pipework. Each of these has a different end point: a drying purge is judged against a dew point target, while an inerting purge is judged against a residual oxygen percentage, and the two should not be confused.

The main hazard in nitrogen purging is not the gas itself but what it displaces: oxygen. A space that has been purged with nitrogen can no longer support human breathing even though it looks, sounds and smells exactly like normal air. Confined space entry after a purge should never proceed without verified oxygen readings, proper ventilation, and lockout of the nitrogen supply.

High-flow mobile pumping units allow purging to be done on a scheduled maintenance window rather than a full shutdown, which is usually the deciding factor in whether a plant can keep a line in service while work is carried out safely.

Leave a Reply

Your email address will not be published. Required fields are marked *